To access the Plug & Play recorder on the web interface, you can either use our remote server (avyconp2p.com if your remote QR code starts with a 'K' or autonat.com if your remote QR code starts with an 'N'), or use the local IP address.
To enable audio over coaxial via the web interface, navigate to:
1. Function Panel
2. Edit Camera
3. Camera Signal
4. Turn on audio over coax on the channel with cameras that support audio
5. Apply when done
Test if audio is working:
Please check if your Plug & Play Hybrid Recorders support Audio Over Coaxial.